open All Channels
seplocked Ships and Modules
blankseplocked Caracal fitting?
This thread is older than 90 days and has been locked due to inactivity.

Author Topic

Posted - 2004.05.30 21:19:00 - [1]

i just wondering how to fit my new caracal? 5 launchers is obviousRolling Eyes and ive got an ok idea for the rest but not sure as ive not flown one before..any help?

heres what i have now:

5x h-50 limos

10mn afb
sensor booster
med clarity
sheild amp

2x cap relays
1 cpu I

not sure how to really fill out the low slots. some help? please

Posted - 2004.05.30 21:39:00 - [2]

Edited by: Jasmyn on 30/05/2004 21:42:16

Bella Verde
Posted - 2004.05.30 22:19:00 - [3]

Sounds good, I take it your skills arent high enough to take out the Co processor yet, so leave that in until you train up your skills enough. Last low slot, maybe another cap relay?

Omniscient Order
Cruel Intentions
Posted - 2004.05.30 23:51:00 - [4]

I havent set up a Caracal for a while, but I remember last time I did, I fit a 100mn afterburner to it. They use something like 500 powergrid, however as long as you are going for a 5 launcher setup you dont run into grid problems.

The reason I fit one was because the caracal has a decent shield, and an MWD will cut that right down.

Posted - 2004.05.31 03:55:00 - [5]

Drop the limos for malkuths, then you can maybe drop the cpu upper.

TDA Shadow
Posted - 2004.05.31 12:27:00 - [6]

This setup works perfectly on all lvl3 agent missions
5x Hvy Limos

1x Large Shield Booster
1x Heat Dissipation Field I (named one)
2x Cap Rechargers

2x Capacitor Power Relay

Need some higher skills to fit all of these but u can always use Malkuth.

No need for BS for missions. Torpedoes do their job very fast.

John McCreedy
Eve Defence Force
Posted - 2004.05.31 13:41:00 - [7]

High slots are obvious.

Med slots: 1 x Shield Amp, 1 x Large Shield Booster and 2 x Cap Recharger II's.

Low: What ever you need to make the Medslots config work.

Posted - 2004.05.31 17:07:00 - [8]

mwd anyone?


This thread is older than 90 days and has been locked due to inactivity.


The new forums are live

Please adjust your bookmarks to

These forums are archived and read-only