open All Channels
seplocked Ships and Modules
blankseplocked Incursion tengu?
 
This thread is older than 90 days and has been locked due to inactivity.


 
Author Topic

Tetsuigablm
Posted - 2011.09.06 07:02:00 - [1]
 

was trying to make an incursion speific tengu, since i just got he skills to fly one together, any ideas on this, look good or no?


- <fitting name="Tengu - Test Tengu">
<description value="" />
<shipType value="Tengu" />
<hardware slot="low slot 0" type="Ballistic Control System II" />
<hardware slot="low slot 1" type="Ballistic Control System II" />
<hardware slot="low slot 2" type="Ballistic Control System II" />
<hardware slot="low slot 3" type="Damage Control II" />
<hardware slot="med slot 0" type="Caldari Navy Invulnerability Field" />
<hardware slot="med slot 1" type="Caldari Navy Invulnerability Field" />
<hardware slot="med slot 2" type="Caldari Navy Photon Scattering Field" />
<hardware slot="med slot 3" type="Phased Weapon Navigation Array Generation Extron" />
<hardware slot="med slot 4" type="Federation Navy Stasis Webifier" />
<hardware slot="med slot 5" type="10MN Afterburner II" />
<hardware slot="hi slot 0" type="Heavy Assault Missile Launcher II" />
<hardware slot="hi slot 1" type="Heavy Assault Missile Launcher II" />
<hardware slot="hi slot 2" type="Heavy Assault Missile Launcher II" />
<hardware slot="hi slot 3" type="Heavy Assault Missile Launcher II" />
<hardware slot="hi slot 4" type="Heavy Assault Missile Launcher II" />
<hardware slot="hi slot 5" type="Heavy Assault Missile Launcher II" />
<hardware slot="rig slot 0" type="Medium Warhead Flare Catalyst II" />
<hardware slot="rig slot 1" type="Medium Warhead Rigor Catalyst II" />
<hardware slot="rig slot 2" type="Medium Warhead Rigor Catalyst II" />
<hardware slot="subsystem slot 0" type="Tengu Defensive - Supplemental Screening" />
<hardware slot="subsystem slot 1" type="Tengu Electronics - Dissolution Sequencer" />
<hardware slot="subsystem slot 2" type="Tengu Offensive - Accelerated Ejection Bay" />
<hardware slot="subsystem slot 3" type="Tengu Propulsion - Fuel Catalyst" />
<hardware slot="subsystem slot 4" type="Tengu Engineering - Augmented Capacitor Reservoir" />
</fitting>
</fittings>

Kesshisan
Minmatar
Posted - 2011.09.06 07:21:00 - [2]
 

Try using copy to clipboard, not export as xml.

That doesn't have nearly enough EHP to survive in an incursions imo. Fit some shield extender rigs. You can make do with only 1 rigor rig. Also the target painter is pretty useless. Use 2x webifiers instead.

And why do you have 2x Caldari Navy Invuln Fields (about 550mil each) but normal BCUs when the Caldari Navy ones run you chump change in comparison?

You've confused my greatly.

Tetsuigablm
Posted - 2011.09.06 07:31:00 - [3]
 

hadnt even considered the cn bcu's, 3 am xD

and i dont have an extender because of 2 reasons, PG is almost maxed with this as it is, and the subsystem i picked will give me +50% shield hp anyway.

Was my logic flawed then ;;

Paranon
Posted - 2011.09.06 07:38:00 - [4]
 

Rigors and Flares don't work with HAMs last time I checked...
Coupled with the shortish range of HAMs, most go with HMs, which will give you the spare grid to fit a LSE.

Most fleets stay very tight, to allow the entire fleet to apply dps, if your HAM tengu goes running off after the rats and gets primaried, the rats end up 40km off the fleet, and you slow your site running times right down.

Good luck.

Para

Kesshisan
Minmatar
Posted - 2011.09.06 07:42:00 - [5]
 

Originally by: Tetsuigablm
and i dont have an extender because of 2 reasons, PG is almost maxed with this as it is


Shield extender rigs don't affect your powergrid.

Originally by: Tetsuigablm
, and the subsystem i picked will give me +50% shield hp anyway.


With your fit you get 63k ehp for a minor dps increase costing you about 2 billion isk.

With my fit you get 68k ehp without costing you more than maybe 1 billion isk total.

If 1 billion isk is worth a minor DPS increase, then by all means, go for it.

Mfume Apocal
Minmatar
Origin.
Black Legion.
Posted - 2011.09.06 08:29:00 - [6]
 

Edited by: Mfume Apocal on 06/09/2011 08:29:23
Originally by: Paranon
Rigors and Flares don't work with HAMs last time I checked...


Rigors don't work for HAMs, Flares do.

Quote:
Coupled with the shortish range of HAMs, most go with HMs, which will give you the spare grid to fit a LSE.


HMLs also have higher practical DPS against frig and cruiser rats, even before you factor in the inherent superiority of rigors as opposed as flares.

Tetsuigablm
Posted - 2011.09.06 14:13:00 - [7]
 

ok, i will adjust accordingly, ty

Herrring
Amarr
National Quality Breaker
Posted - 2011.09.07 23:31:00 - [8]
 

don't fit shield rigs.

You lose the signature advantage a tengu has because shield rigs increase sig at a ratio not a set number.

Just fit one large extender + shield buffer subsystem and that will be enough.

Aamrr
Posted - 2011.09.08 06:52:00 - [9]
 

Agreed. Missiles have enough difficulty applying their damage in the first place. You need a pair of T2 rigors and a T2 flare to reasonably apply the damage you're putting out.

...and probably a target painter, too.


 

This thread is older than 90 days and has been locked due to inactivity.


 


The new forums are live

Please adjust your bookmarks to https://forums.eveonline.com

These forums are archived and read-only