open All Channels
seplocked Issues, Workarounds & Localization
blankseplocked Brightness glitch on docking
 
This thread is older than 90 days and has been locked due to inactivity.


 
Author Topic

Sellendis
Caldari
Posted - 2011.08.30 08:59:00 - [1]
 

Ok, everything is fine when CQ is disabled. When enabled (god knows why i even bother) i get a strange glitch on docking.

Without CQ
CQ off

With CQ
CQ on

Rig is
E6500
Hd 5770 (tried last 4 driver sets with no luck)
4gb ram
Win7 x64

All drivers and stuff up to date, all drivers cleaned before putting new ones. Always with that brightness glitch. I am playing in fixed window mode but same thing with full screen or window mode. Currently out of ideas what to try next.
Suggestions (aside buying a nVidia, probably gonna do that on next PC upgrade) are welcome.

Sobaan Tali
Posted - 2011.08.30 13:05:00 - [2]
 

Is that a Mach WITHOUT a prop mod? Tisk, tisk...

Anyways, is the UI the only thing bright or everything on the monitor? (cant really tell from that angle)

Sellendis
Caldari
Posted - 2011.08.30 17:30:00 - [3]
 

Originally by: Sobaan Tali
Is that a Mach WITHOUT a prop mod? Tisk, tisk...

Anyways, is the UI the only thing bright or everything on the monitor? (cant really tell from that angle)


Yes its a test Mach, just jumped into a unfinished test ship for screen-shot purpose, and there was no faction AB to get for testing. :) Dont even ask about the rest of crappy equipment, still around 50 days to skill.

Only the UI brightens, the station remained the same. Open both pictures side-by-side and take a look. Strange glitch.

Liquid Drops
Posted - 2011.08.31 10:43:00 - [4]
 

Edited by: Liquid Drops on 31/08/2011 10:45:17
I have some more for you. These things are still happening despite claims that some of them have been fixed.

I will post more as I get them. I have had the blue speed indicator that shows a speed even though ship is stationary. Also the one where salvage modules continued to cycle when nothing was targeted, the module continued to cycle even after jumping though an acceleration gate.

Yes I cleared my cache I do this every time before I load the Eve Client.

Salvage module icons not showing
Salvage Excellence

Warping sideways
Warp Excellence



Liquid Drops
Posted - 2011.08.31 17:31:00 - [5]
 

As promised here is another I got just now. All of these screenshots were taken within the last few days.

We can hope the patch tomorrow fixes some of them but from reading it I doubt it.

Speed Indicator Excellence

Daedalus II
Helios Research
Posted - 2011.09.01 16:30:00 - [6]
 

Originally by: Sellendis
Ok, everything is fine when CQ is disabled. When enabled (god knows why i even bother) i get a strange glitch on docking.

Without CQ
CQ off

With CQ
CQ on

Rig is
E6500
Hd 5770 (tried last 4 driver sets with no luck)
4gb ram
Win7 x64

All drivers and stuff up to date, all drivers cleaned before putting new ones. Always with that brightness glitch. I am playing in fixed window mode but same thing with full screen or window mode. Currently out of ideas what to try next.
Suggestions (aside buying a nVidia, probably gonna do that on next PC upgrade) are welcome.


I'd assume that is due to some kind of shaders or similar that are used in CQ getting started before CQ actually loads. In my opinion a very minor annoyance, I mean come on, you only see it a couple of seconds when you dock.

Often you don't even see your entire ship the first seconds you undock, but you don't complain about that?

Sellendis
Caldari
Posted - 2011.09.01 17:00:00 - [7]
 

Originally by: Daedalus II


I'd assume that is due to some kind of shaders or similar that are used in CQ getting started before CQ actually loads. In my opinion a very minor annoyance, I mean come on, you only see it a couple of seconds when you dock.

Often you don't even see your entire ship the first seconds you undock, but you don't complain about that?


Well, since i haven't seen others complain about this, i was thinking its a problem on my side. It started after a patch on SiSi, way before it hits TQ, but since i keep my CQ off i was blaming it on drivers (its Ati after all) but even after the latest upgrade its still here. Weird.
You could be on a right track about shaders or something, its not a big deal, but i am just nit-picky about glitches.


 

This thread is older than 90 days and has been locked due to inactivity.


 


The new forums are live

Please adjust your bookmarks to https://forums.eveonline.com

These forums are archived and read-only