open All Channels
seplocked Ships and Modules
blankseplocked Harbinger PvE
 
This thread is older than 90 days and has been locked due to inactivity.


 
Author Topic

Noran Talidan
Amarr
Posted - 2011.08.23 02:01:00 - [1]
 

Here is my setup for my mission worthy Harby. The Hardeners can obviously be changed around but other then that what do you guys and gals think?


Heat Sink II
Heat Sink II
Medium Armor Repairer II
Armor Kinetic Hardener II
Armor Kinetic Hardener II
Armor Thermic Hardener II

Sensor Booster I
Cap Recharger II
Cap Recharger II
10MN Afterburner II

Heavy Beam Laser II
Heavy Beam Laser II
Heavy Beam Laser II
Heavy Beam Laser II
Heavy Beam Laser II
Heavy Beam Laser II
Salvager I
Empty

Medium Capacitor Control Circuit I
Medium Capacitor Control Circuit I
Medium Capacitor Control Circuit I


Hammerhead II

Read more: http://eve.battleclinic.com/loadout/55411-Harbinger-PVE-L-R.html#ixzz1VoTkru7a

Ildryn
Posted - 2011.08.23 02:47:00 - [2]
 

You're missing a laser.

Use smaller lasers if your fitting does not have enough cpu/pg.
This fit gives you more dps, better armor repair and is cap stable.

Heat Sink II
Heat Sink II
Medium Armor Repairer II
Armor Kinetic Hardener II
Armor Kinetic Hardener II
Armor Thermic Hardener II

Cap Recharger II
Cap Recharger II
Cap Recharger II
10MN Afterburner II

Focused Medium Pulse Laser II
Focused Medium Pulse Laser II
Focused Medium Pulse Laser II
Focused Medium Pulse Laser II
Focused Medium Pulse Laser II
Focused Medium Pulse Laser II
Focused Medium Pulse Laser II
Salvager I

Medium Capacitor Control Circuit I
Medium Auxiliary Nano Pump I
Medium Auxiliary Nano Pump I


Wind Rush Norana
Posted - 2011.08.23 11:28:00 - [3]
 

Originally by: Ildryn
You're missing a laser.

Use smaller lasers if your fitting does not have enough cpu/pg.
This fit gives you more dps, better armor repair and is cap stable.

Heat Sink II
Heat Sink II
Medium Armor Repairer II
Armor Kinetic Hardener II
Armor Kinetic Hardener II
Armor Thermic Hardener II

Cap Recharger II
Cap Recharger II
Cap Recharger II
10MN Afterburner II

Focused Medium Pulse Laser II
Focused Medium Pulse Laser II
Focused Medium Pulse Laser II
Focused Medium Pulse Laser II
Focused Medium Pulse Laser II
Focused Medium Pulse Laser II
Focused Medium Pulse Laser II
Salvager I

Medium Capacitor Control Circuit I
Medium Auxiliary Nano Pump I
Medium Auxiliary Nano Pump I





Good fit.
I would drop one of the armor hardeners and use a 3rd heat sink instead. Plus, make sure you use Scorch crystals. And I would seriously be tempted to use a shield hardener or target painter in place of the 3rd cap recharger.

Leppa Avato
Posted - 2011.08.23 12:38:00 - [4]
 

Quote:
Good fit. I would drop one of the armor hardeners and use a 3rd heat sink instead. Plus, make sure you use Scorch crystals. And I would seriously be tempted to use a shield hardener or target painter in place of the 3rd cap recharger.


Im pretty certain with 2 aux nano's instead of ccc's you really need that third cap recharger. And even then you woulnd't exchange them for a shield hardener(lol?) or a target painter...

Noran Talidan
Amarr
Posted - 2011.08.23 15:54:00 - [5]
 

Ok I came up with 2 new fits not sure which one to choose yet, what do you guys think?

1st:

[Harbinger, PVE L/R]

Medium Armor Repairer II
Armor Kinetic Hardener II
Armor Kinetic Hardener II
Armor Thermic Hardener II
Heat Sink II
Heat Sink II

10MN Afterburner II
Cap Recharger II
Cap Recharger II
Cap Recharger II

Heavy Pulse Laser II, Scorch M
Heavy Pulse Laser II, Scorch M
Heavy Pulse Laser II, Scorch M
Heavy Pulse Laser II, Scorch M
Heavy Pulse Laser II, Scorch M
Heavy Pulse Laser II, Scorch M
Heavy Pulse Laser II, Scorch M
Salvager I

Medium Capacitor Control Circuit I
Medium Capacitor Control Circuit I
Medium Auxiliary Nano Pump I

Hammerhead II x5

[Statistics - Noran Talidan]

Effective HP: 47,255
Tank Ability: 198.26 DPS
Damage Profile - Guristas (EM: 0.00%, Ex: 0.00%, Ki: 83.57%, Th: 16.43%)
Shield Resists - EM: 0.00%, Ex: 50.00%, Ki: 40.00%, Th: 20.00%
Armor Resists - EM: 50.00%, Ex: 20.00%, Ki: 82.38%, Th: 70.75%

Capacitor: Stable at 26.82%

Volley Damage: 1,131.21
DPS: 350.43


2nd:

[Harbinger, PVE L/R]

Medium Armor Repairer II
Armor Kinetic Hardener II
Armor Kinetic Hardener II
Armor Thermic Hardener II
Heat Sink II
Heat Sink II

10MN Afterburner II
Cap Recharger II
Cap Recharger II
Cap Recharger II

Heavy Pulse Laser II, Scorch M
Heavy Pulse Laser II, Scorch M
Heavy Pulse Laser II, Scorch M
Heavy Pulse Laser II, Scorch M
Heavy Pulse Laser II, Scorch M
Heavy Pulse Laser II, Scorch M
Heavy Pulse Laser II, Scorch M
Salvager I

Medium Capacitor Control Circuit I
Medium Auxiliary Nano Pump I
Medium Auxiliary Nano Pump I

Hammerhead II x5

[Statistics - Noran Talidan]

Effective HP: 47,255
Tank Ability: 224.10 DPS
Damage Profile - Guristas (EM: 0.00%, Ex: 0.00%, Ki: 83.57%, Th: 16.43%)
Shield Resists - EM: 0.00%, Ex: 50.00%, Ki: 40.00%, Th: 20.00%
Armor Resists - EM: 50.00%, Ex: 20.00%, Ki: 82.38%, Th: 70.75%

Capacitor: Lasts 5m 7s

Volley Damage: 1,131.21
DPS: 350.43


As you can see, one has more tank then the other, but one has stable cap while the other does not.
Suggestions?




Zhilia Mann
Tide Way Out Productions
Posted - 2011.08.23 16:20:00 - [6]
 

This is how you fit a cap stable L3 mission Harb:

[Harbinger, mishin harb]
Heat Sink II
Heat Sink II
Heat Sink II
Armor EM Hardener II
Armor Thermic Hardener II
Medium Armor Repairer II

Cap Recharger II
Cap Recharger II
Cap Recharger II
10MN Afterburner II

Heavy Pulse Laser II, Scorch M
Heavy Pulse Laser II, Scorch M
Heavy Pulse Laser II, Scorch M
Heavy Pulse Laser II, Scorch M
Heavy Pulse Laser II, Scorch M
Heavy Pulse Laser II, Scorch M
Heavy Pulse Laser II, Scorch M
[empty high slot]

Medium Capacitor Control Circuit I
Medium Auxiliary Nano Pump I
Medium Auxiliary Nano Pump I


Hammerhead II x5

If you don't want/need/care about cap stability swap a cap recharger for a web (definitely not a shield hardener). If you have great cap skills, dropping one ANP for a nanobot accelerator will improve your tank somewhat without compromising stability. If you can't use T2 pulse, use beams. If you run in to CPU issues, drop one heat sink for a tracking enhancer. If you run in to grid issues, first try swapping the T2 AB for a YS-8 (there's really no reason not to do this right off the bat). If you still have grid issues, downgrade to FMPIIs as needed. If you absolutely must have more tank (you really shouldn't need it; use Scorch to dictate range while applying damage) try a swapping a suitcase for one of the heatsinks.

And that's pretty much all there is to it.

Ildryn
Posted - 2011.08.23 21:31:00 - [7]
 

Originally by: Noran Talidan
Ok I came up with 2 new fits not sure which one to choose yet, what do you guys think?

1st:

[Harbinger, PVE L/R]

Medium Armor Repairer II
Armor Kinetic Hardener II
Armor Kinetic Hardener II
Armor Thermic Hardener II
Heat Sink II
Heat Sink II

10MN Afterburner II
Cap Recharger II
Cap Recharger II
Cap Recharger II

Heavy Pulse Laser II, Scorch M
Heavy Pulse Laser II, Scorch M
Heavy Pulse Laser II, Scorch M
Heavy Pulse Laser II, Scorch M
Heavy Pulse Laser II, Scorch M
Heavy Pulse Laser II, Scorch M
Heavy Pulse Laser II, Scorch M
Salvager I

Medium Capacitor Control Circuit I
Medium Capacitor Control Circuit I
Medium Auxiliary Nano Pump I

Hammerhead II x5

[Statistics - Noran Talidan]

Effective HP: 47,255
Tank Ability: 198.26 DPS
Damage Profile - Guristas (EM: 0.00%, Ex: 0.00%, Ki: 83.57%, Th: 16.43%)
Shield Resists - EM: 0.00%, Ex: 50.00%, Ki: 40.00%, Th: 20.00%
Armor Resists - EM: 50.00%, Ex: 20.00%, Ki: 82.38%, Th: 70.75%

Capacitor: Stable at 26.82%

Volley Damage: 1,131.21
DPS: 350.43


2nd:

[Harbinger, PVE L/R]

Medium Armor Repairer II
Armor Kinetic Hardener II
Armor Kinetic Hardener II
Armor Thermic Hardener II
Heat Sink II
Heat Sink II

10MN Afterburner II
Cap Recharger II
Cap Recharger II
Cap Recharger II

Heavy Pulse Laser II, Scorch M
Heavy Pulse Laser II, Scorch M
Heavy Pulse Laser II, Scorch M
Heavy Pulse Laser II, Scorch M
Heavy Pulse Laser II, Scorch M
Heavy Pulse Laser II, Scorch M
Heavy Pulse Laser II, Scorch M
Salvager I

Medium Capacitor Control Circuit I
Medium Auxiliary Nano Pump I
Medium Auxiliary Nano Pump I

Hammerhead II x5

[Statistics - Noran Talidan]

Effective HP: 47,255
Tank Ability: 224.10 DPS
Damage Profile - Guristas (EM: 0.00%, Ex: 0.00%, Ki: 83.57%, Th: 16.43%)
Shield Resists - EM: 0.00%, Ex: 50.00%, Ki: 40.00%, Th: 20.00%
Armor Resists - EM: 50.00%, Ex: 20.00%, Ki: 82.38%, Th: 70.75%

Capacitor: Lasts 5m 7s

Volley Damage: 1,131.21
DPS: 350.43


As you can see, one has more tank then the other, but one has stable cap while the other does not.
Suggestions?


Great...now lets improve on that. Level 3s right?

[Harbinger, PVE L/R]

Medium Armor Repairer II
Power Diagnostic System II
Armor Kinetic Hardener II
Armor Thermic Hardener II
Heat Sink II
Heat Sink II

10MN Afterburner II
Cap Recharger II
Cap Recharger II
Cap Recharger II

Heavy Beam Laser II Imperial Navy Multifrequency M
Heavy Beam Laser II Imperial Navy Multifrequency M
Heavy Beam Laser II Imperial Navy Multifrequency M
Heavy Beam Laser II Imperial Navy Multifrequency M
Heavy Beam Laser II Imperial Navy Multifrequency M
Heavy Beam Laser II Imperial Navy Multifrequency M
Heavy Beam Laser II Imperial Navy Multifrequency M
Salvager I

Medium Capacitor Control Circuit I
Medium Auxiliary Nano Pump I
Medium Auxiliary Nano Pump I

Hammerhead II x5

[Statistics - Ildryn]

Effective HP: 34043
Tank Ability: 145 guristas
Damage Profile - Guristas (EM: 0.00%, Ex: 0.00%, Ki: 83.57%, Th: 16.43%)
Shield Resists - EM: 0.00%, Ex: 50.00%, Ki: 40.00%, Th: 20.00%
Armor Resists - EM: 50.00%, Ex: 20.00%, Ki: 66.38%, Th: 70.8%

Capacitor: Lasts 47% cap stable

Volley Damage: 1614
DPS: 593


 

This thread is older than 90 days and has been locked due to inactivity.


 


The new forums are live

Please adjust your bookmarks to https://forums.eveonline.com

These forums are archived and read-only