open All Channels
seplocked Ships and Modules
blankseplocked Pilgrim solo fit
 
This thread is older than 90 days and has been locked due to inactivity.


 
Author Topic

Tocoyon
Amarr
Apolitical
Posted - 2009.10.14 20:18:00 - [1]
 

Hi Guys,

could you please help me with your best Pilgrim solo fit?

Thanks in advance,
Toco

Precisionist
Posted - 2009.10.14 21:08:00 - [2]
 

Well with no probe launcher,

Cloak med neuts 2-3 of them

scramb, web, med injector, Mwd(if you think you will need to run) Ab if you dont, and a turret Disrupter.

MAR t2 800 plate EANM t2 Active therm and active kin.

Nerogk Shorn
Caldari
Invicta.
Posted - 2009.10.21 06:19:00 - [3]
 

I have been having some trouble coming up with a fit too. It's fitting requirements are pretty nice as long as you aren't trying to fit a 1600 plate on it.

However, I'm trying to come up with a reasonably cap stable setup without an injector and a MAR. Should I just give up? Are Nosferatus kinda pointless?

Another thing is, if I'm solo in 0.0 or low sec pirating, is a probe launcher worthwhile?

Nerogk Shorn
Caldari
Invicta.
Posted - 2009.10.21 06:25:00 - [4]
 

This is what i was sorta thinking for the no-injector idea. Is it even feasible.

[Pilgrim, PVP - No Injector]
800mm Reinforced Rolled Tungsten Plates I
Medium Armor Repairer II
Damage Control II
Energized Adaptive Nano Membrane II
Energized Adaptive Nano Membrane II

Y-S8 Hydrocarbon I Afterburners
Warp Scrambler II
Stasis Webifier II
Balmer Series Targeting Inhibitor I
Balmer Series Targeting Inhibitor I

Medium Nosferatu II
Medium Energy Neutralizer II
Medium Energy Neutralizer II
Covert Ops Cloaking Device II

Capacitor Control Circuit I
Egress Port Maximizer I


Hammerhead II x5
Vespa EC-600 x5
Warrior II x5
Hobgoblin II x5

Thingymawotzit
Kangaroos With Frickin Lazerbeams
Ninja Unicorns with Huge Horns
Posted - 2009.10.21 06:30:00 - [5]
 

Hey mate,

I like the 1600 fit. All you end up sacrificing is a med nos for a small nos (which can actually work in your favour most of the time due to low cycle time and dodgy nos mechanics etc.)


1600mm Reinforced Rolled Tungsten Plates I
Energized Adaptive Nano Membrane II
Energized Adaptive Nano Membrane II
Energized Thermic Membrane II
Damage Control II

10MN Afterburner II
Warp Scrambler II
Stasis Webifier II
Medium Electrochemical Capacitor Booster I,Cap Booster 800
Tracking Disruptor II

Medium Energy Neutralizer II
Medium Energy Neutralizer II
Small Nosferatu II
Covert Ops Cloaking Device II

Medium Trimark Armor Pump I
Medium Trimark Armor Pump I

Drones_Active=Hammerhead II,5

You can also use best named neuts and stuff and be able to fit an mwd but i actually prefer the AB for evading turret fire.

Angry Poster
Posted - 2009.10.21 08:27:00 - [6]
 

The following setup is great for killing ratters in belts. Use the MWD to get out of bubbles or to close range quickly and use the AB to reduce turret tracking and/or missile damage when you're fighting the ratter up close. This setup requires Recons 5. It's also possible to fit a nearly equivalent setup with only Recons 4 but that requires you to use best named and/or faction to make it work CPU-wise.

[Pilgrim, Solo Ratter Hunter]
Damage Control II
Medium Armor Repairer II
800mm Reinforced Rolled Tungsten Plates I
Energized Adaptive Nano Membrane II
Energized Adaptive Nano Membrane II

10MN MicroWarpdrive II
10MN Afterburner II
Medium Capacitor Booster II, Cap Booster 800
Warp Scrambler II
Tracking Disruptor II

Medium Energy Neutralizer II
Medium Energy Neutralizer II
Small Energy Neutralizer II (or a small NOS if you like)
Covert Ops Cloaking Device II

Medium Trimark Armor Pump I
Medium Egress Port Maximizer I

Grarr Bexx
Posted - 2009.10.21 09:01:00 - [7]
 

Originally by: Angry Poster
The following setup is great for killing ratters in belts. Use the MWD to get out of bubbles or to close range quickly and use the AB to reduce turret tracking and/or missile damage when you're fighting the ratter up close. This setup requires Recons 5. It's also possible to fit a nearly equivalent setup with only Recons 4 but that requires you to use best named and/or faction to make it work CPU-wise.

[Pilgrim, Solo Ratter Hunter]
Damage Control II
Medium Armor Repairer II
800mm Reinforced Rolled Tungsten Plates I
Energized Adaptive Nano Membrane II
Energized Adaptive Nano Membrane II

10MN MicroWarpdrive II
10MN Afterburner II
Medium Capacitor Booster II, Cap Booster 800
Warp Scrambler II
Tracking Disruptor II

Medium Energy Neutralizer II
Medium Energy Neutralizer II
Small Energy Neutralizer II (or a small NOS if you like)
Covert Ops Cloaking Device II

Medium Trimark Armor Pump I
Medium Egress Port Maximizer I


That a boy. I'd just drop the trimark for a therm and the egress for an ANP. Here's my fit, I put some more money into it Cool

[Pilgrim, THE BEST]
Corelum C-Type Medium Armor Repairer
Imperial Navy 800mm Reinforced Steel Plates
Amarr Navy Energized Adaptive Nano Membrane
Amarr Navy Energized Adaptive Nano Membrane
Internal Force Field Array I

True Sansha Medium Capacitor Booster, Cap Booster 800
10MN MicroWarpdrive II
True Sansha Warp Scrambler
10MN Afterburner II
'Distributor' Tracking Disruptor I

Medium Unstable Power Fluctuator I
Medium Unstable Power Fluctuator I
Covert Ops Cloaking Device II
Small Energy Neutralizer II

Anti-Thermic Pump I
Auxiliary Nano Pump I

(If anyone has a decently priced small faction neut, please contact me :P)

Nerogk Shorn
Caldari
Invicta.
Posted - 2009.10.22 06:06:00 - [8]
 

Edited by: Nerogk Shorn on 22/10/2009 06:08:01
Are injectors pretty necessary? What about any fits with a Probe Launcher? I would really like a fit with 2 TD as well.

Edit: obviously if you need an injector, 2 TD becomes impossible unless you drop the web, which i'm not sure i'd be willing to do. Are webs really needed, as with a scrambler and short range neuts, it's not like you can run away from frigs anyway.

rubico1337
Caldari
Mnemonic Enterprises
Posted - 2009.10.22 06:14:00 - [9]
 

Originally by: Nerogk Shorn
Edited by: Nerogk Shorn on 22/10/2009 06:08:01
Are injectors pretty necessary? What about any fits with a Probe Launcher? I would really like a fit with 2 TD as well.


[Pilgrim, current build]
Medium Armor Repairer II
Damage Control II
1600mm Reinforced Rolled Tungsten Plates I
Amarr Navy Energized Adaptive Nano Membrane
Amarr Navy Energized Adaptive Nano Membrane

True Sansha Warp Scrambler
10MN Afterburner II
Medium Electrochemical Capacitor Booster I, Cap Booster 800
Tracking Disruptor II, Tracking Speed Disruption
Tracking Disruptor II, Tracking Speed Disruption

Medium Energy Neutralizer II
Medium Energy Neutralizer II
Core Probe Launcher I, Sisters Core Scanner Probe I
Covert Ops Cloaking Device II

Ancillary Current Router I
Gravity Capacitor Upgrade I


Hammerhead II x5
Warrior II x5
Vespa EC-600 x5
Hobgoblin II x5


 

This thread is older than 90 days and has been locked due to inactivity.


 


The new forums are live

Please adjust your bookmarks to https://forums.eveonline.com

These forums are archived and read-only